Aller au contenu

Sacasa Blog

Le Blog du Test et de la Mesure . Le spécialiste en Acquisition de données, Traitement du Signal, Acquisition d'Images Numériques et PC Industriels.


  • Power worldwide with universal AC adapter
  • DC power from 12V to 50V source
  • Install from 1 up to 8 channels per USBDR-8
  • Daisy chain USBDR-8 to control up to 24 channels using just one USB port
  • USB 2.0 compatible communication
  • Synchronize all USBPxx-S1 operation in tracking or dynamic control applications
  • Operate on table top, wall mount, rack mount or DIN rail mount
  • Optional DIN rail connection kit for mounting the USBDR-8 to DIN rail
  • Optional 19 inch aluminum rack mount plate available

Up to eight (8) USBPxx-S1 programmable instrumentation amplifiers and filter modules can be plugged into a USBDR-8. Up to 24 USBPxx-S1 modules can be controlled on a single USB link to the host PC. Each USBDR-8 has an up-link USB port and a down-link USB port. Up to 3 fully or partially populated USBDR-8 can be daisy chained by connecting the first USBDR-8 up-link port to the host and then the down-link port to the next USBDR-8 up-link port in the chain. The SystemViewUSB Windows software will detect and display an individual control dialog for each USBPxx-S1 module when the USB chain becomes active.

Once the USBPxx-S1 modules have been configured, the USB links can be disconnected. The USBPxx-S1 modules can operate independently and will remember their settings through power cycles. In environments requiring turn-key system operation, this eliminates the need to provide any USB connections to USBDR-8. Power is the only required connection to USBDR-8 for turn-key system operation.

When programmed from the USB port, the USBPBP-S1 will remember all of the programmed properties between power cycles. Program once and operate as a stand-alone signal conditioner without having to reprogram for every use. This is perfect for turn-key applications. It’s easy to connect the USBPBP-S1 into the data collection system. Input and output signals can be routed through BNC connection or by using the detachable screw terminal connectors.

  • Differential or single-ended input
  • ±10Vmax Signal Input and Output with input protection up to ±40V
  • Software-programmable instrumentation amplifier gains of 1 to 1000
  • Compatible with any 12, 16, or 24-bit A/D converter devices
  • Windows compatible menu setup software and SDK included
  • Software select any low pass corner frequency from 0.1 Hz to the maximum with no steps
  • Low pass filter available as an 8-Pole Bessel to 66 kHz maximum corner frequency
  • Low pass filter available as an 8-Pole Butterworth to 100 kHz maximum corner frequency
  • Low pass filter available as an 8-Pole Cauer/Elliptic to 50 kHz maximum corner frequency
  • Low pass filter available as an8-Pole Cauer/Elliptic to 100 kHz maximum corner frequency
  • Low pass filter available as an 8-Pole Linear Phase to 100 kHz maximum corner frequency
  • Low pass filter available as an 8-Pole Linear Phase to 200 kHz maximum corner frequency
  • Software select any high pass Fc from 10 Hz to 1275 Hz (N) or 1100 Hz to 41.5 kHz (E)
  • High pass filter available as a 4-Pole Butterworth
  • High pass filter available as a 4-Pole Bessel
  • Filter rejection band attenuation up to -90dB
  • Low pass Fc may be controlled with an external clock for tracking filter applications
  • Software control low pass synchronization to the A/D sampling rate to eliminate sampling errors
  • USB 2.0 compatible communication for setup and control
  • Non-volatile configuration retains all settings through power cycles
  • Does not need to be attached to a PC to operate
  • DC power source allows for convenient 9 to 12V battery operation
  • Includes universal AC/DC power adapter use anywhere on the planet
  • Factory calibrated for unity gain and very low DC offset filter output
  • Use multiple USBPBP-S1 units for multi-channel applications

The USBPBP-S1 stand alone USB controllable module provides a single channel of , high-pass, low-pass filtering and high-quality instrumentation amplifier for front-end signal conditioning compatible with all popular A/D converter devices. The USBPBP-S1 is powered with 9 to 12VDC so it can be connected to a battery voltage source or the supplied 115-220VAC adapter may be used for operation with wall power anywhere in the world.

quelques unes des marques que nous représentons. Pour une mise à jour optimale, rendez nous visite sur notre site internet